#1 11-12-2018 10:59:00

From: basecamp
Registered: 29-04-2016
Posts: 51

Battery tray problem - heads up

One of these has broken loose in my Argyle SE.

The tray sits on a cross member and has a couple of feet riveted to the body bottom.  The rivets had pulled out and the tray has been bashing around for some time, bending one leg.

Not surprising: there's one rivet per foot and the body at that point is only alloy checker plate.  A more recent version apparently has both steel and alloy checker plate as well as two rivets per foot.

Trakmaster, bless them, could sell me a replacement tray.

It isn't going to be easy to fit since the fixings will have to be bolts now and they'll be underneath the tray.



Board footer

Powered by FluxBB